Descale the bottle warmer for optimal use. If you have hard water, residual build-up on the heating element may occur. You can descale the heating element by mixing 2 oz (50 ml) of white vinegar and 4 oz (100 ml) of cold water and pour directly into the Removeable Water Reservoir.

Do I need to descale bottle warmer?

Descale the bottle warmer for optimal use. If you have hard water, residual build-up on the heating element may occur. You can descale the heating element by mixing 2 oz (50 ml) of white vinegar and 4 oz (100 ml) of cold water and pour directly into the Removeable Water Reservoir.

How do I descale my first years bottle warmer?

To remove mineral deposits:

1. Unplug the unit.
2. Remove the basket, and wash separately as indicated above.
3. Pour 2 oz. vinegar into the warming chamber and let it stand for an hour or two (longer if necessary).
4. Pour out the vinegar and rinse the chamber two or three times with 3 or 4 oz. of clean tap water.

How do I clean my brezza bottle warmer?

The bottle warmer should be descaled at least every weeks. To descale we recommend using 2 ounces white vinegar and 4 ounces of cold water and pour it into the water chamber. Then run on one heating cycle, setting 5 until all scaling has been removed. If you have any further questions please contact us 888-396-6552.

How do I clean my brezza water warmer?

Note: If the Instant Warmer is accidentally immersed and water gets inside, wipe with a clean dry cloth and allow it to dry completely before next use. Base should be wiped with damp cloth only. Never use abrasive pads to clean the Instant Warmer parts.

Can you Sterilise NUK bottles?

NUK Baby Bottles are well suited to being boiled and sterilised with steam.

How do you open a NUK bottle?

The baby bottle opens and closes with only one twist. Simply screw the NUK Open & Close screw cap between the NUK First Choice baby bottle and the threaded ring of the teat and the new locking system is ready for use.

How do you clean a bottle warmer with vinegar?

Mix 60ml/2oz of white vinegar with 120ml/4oz of cold water to descale your bottle warmer. Pour the solution into the bottle warmer. Switch on the bottle warmer and select the express milk warming setting 1 and let the appliance operate for 10 minutes.

How do I clean my Baby Brezza food maker?

Put 1/3 cup white vinegar and 1/3 cup distilled water in machine and let sit overnight. Pour out vinegar and water solution following instructions below. Refill Steam Tank with purified water, plug in machine and run “Steam” cycle for 15 minutes. Rinse with purified water to eliminate any remaining vinegar taste.

How do you get mold out of a Baby Brezza Bottle Warmer?

Add Baby Brezza Descaler Liquid, or a cup of distilled white vinegar inside the water tank with 12oz of water and run another 10oz cycle.