Step 1 Turn the power of your Optical Network Terminal (ONT) and router off. After 5 minutes, turn on the power of your ONT and router. Step 2 Shut down your computer and start up again after 5 minutes.

How do I reset my Singtel network?

Step 1 Turn the power of your Optical Network Terminal (ONT) and router off. After 5 minutes, turn on the power of your ONT and router. Step 2 Shut down your computer and start up again after 5 minutes.

How do I connect to Singtel?

Use RJ45 Ethernet cable to connect LAN 1 port on the ONR to the blue Internet port of the Wireless Router. Connect the fibre optic cable from port 1 of the FTP to the Fibre Port located at the bottom of the Optical Network Router (ONR). Connect Wireless Router to power and switch on.

How do I access my Singtel router settings?

Singtel Mesh- Router Info

1. Visit http://192.168.1.254 to view your router configuration page.
2. Enter your username and password that can be found on the label at the back of your router that indicates Web Login Info. You will be able to find the information once logged in.

How do I connect my Singtel mesh?

Take the LAN cable from the WiFi Mesh / Wireless Booster box and connect one end to the corresponding data point in your home. Connect the other end to the LAN port of the WiFi Mesh / Wireless Booster. Check the light from the LAN port is flashing.

What do I do if my Singtel WiFi is not working?

Unable to connect to internet

1. Unable to connect to internet.
2. Select and check your network device(s) in the following sequence.
3. Check your Optical Network Terminal (ONT) or Optical Network Router (ONR)
4. Check your router.
5. Check your mesh.

How do I connect my set top box to WiFi?

Go to Settings or select Wi-Fi icon on Home Screen. In settings Select Network. From an available network tab, select the Wi-Fi (SSID) to which you want to connect your Set Top Box to. Enter the password for the corresponding SSID.

How do I connect my Singtel to my TV?

Click on the ‘MENU’ button on your Singtel TV remote control • Navigate to ‘Settings’ • Select ‘General’ iv. Select ‘Device Pairing’ • Follow the step-by-step instructions on how you can pair the device to your Singtel TV set-top box shown on Singtel TV GO.

What is WPS button on Singtel router?

Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier.

How do I reset my Singtel router?

Step 1: With the unit on, place a paper clip into the hole on the back/bottom of the unit labelled Reset. Step 2: Hold the paper clip down for 10 seconds and release. Step 3: The lights on the front of the router should start to flash (The power LED may go off or turn orange) and then the device will reboot.

How do you set up a mesh extender?

To set up your extender:

1. Plug in your extender.
2. Connect your computer or mobile device to the extender’s WiFi network.
3. Launch a web browser and enter mywifiext.net or 192.168.
4. Click or tap NEW EXTENDER SETUP.
5. Choose your extender’s admin credentials.
6. Select and answer two security questions from the drop-down menus.

How do I connect my mesh WiFi?

Although each mesh network vendor’s setup process differs in detail, all follow the same general procedure: After you choose a system, download its app to your phone. Unplug the router and connect the main node to it using an Ethernet cable. Reconnect the router and let it and the main node power up.