How do you open the trunk on a 2010 Honda Insight?

To open the trunk, press the trunk release button on the driver’s door. You can also use the master key to open the trunk lock. To close the trunk, press down on the trunk lid. Do not press down on the rear spoiler as you may damage it.

Where is the trunk release button?

The trunk lid can be released from inside the vehicle by pushing the Trunk Release button. The button is located on the instrument panel to the left of the steering wheel.

Where is the emergency trunk release?

Pull up on the trunk release lever located to the left of the driver’s seat. Lock the trunk release lever with your master key to prevent someone from opening the trunk. If they need to lock/unlock the doors or drive your vehicle, give them your valet key.

Why is my trunk not opening?

Trunk not opening Sometimes, latch vibration, age, and corrosion can damage release level, or the latch release lever may break and result in the trunk not opening. The solution is to replace the whole latch assembly.

How do I open my trunk without a key?

Answer provided by

1. Stick the pick down between the window and the window trim.
2. Feel around with the pick for a rod.
3. Then, use the pick to lift up the rod and the car door should open.
4. At this point, locate the trunk release button or lever inside your car.
5. Push or pull the mechanism to unlock the trunk.

Can you open a trunk from the inside?

If the car is equipped with a cable trunk release that can be operated from inside the car (usually by a lever near the driver’s seat), you may be able to pull the cable and open the trunk latch.

How do you open the trunk of a Honda HRV?

In the center of the tailgate, you should see a plastic cover over the lock. If you remove the cover, you should see a lever that will allow you to open your trunk!

Do all cars have trunk release?

All American cars made after 2002 are required to have a trunk release inside the trunk, thanks to a national law.