Any failed coatings should be removed and the surface sanded smooth and dust removed. The initial coat of DiamondFinish Clear should be thinned by approximately 30% using KBS #1 Thinners. Apply a single covering coat to seal the wood. Allow to cure 24 hours.

How long does it take for KBS to cure?

Any failed coatings should be removed and the surface sanded smooth and dust removed. The initial coat of DiamondFinish Clear should be thinned by approximately 30% using KBS #1 Thinners. Apply a single covering coat to seal the wood. Allow to cure 24 hours.

How long does it take KBS diamond to dry?

For best results, always apply coats consecutively within 24 hours of each coat curing. Average recoat cure times are 1-2 hours depending on humidity levels. Full cure is usually achieved within 48 hours.

Can you paint over KBS RustSeal?

To protect against unwanted cosmetic changes, topcoat RustSeal with any opaque paint system. Please note that a clear topcoat (like DiamondFinish Clear or KBS MAXX Clear) cannot provide the needed UV protection.

Is Diamond Finish KBS heat resistant?

DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit. Can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part (1K) or Two Part (2K) paints.

Can you thin KBS diamond clear?

DiamondFinish Clear can be thinned up to 30%. Spray pressure of 35-45 psi(250-330 kpa) for siphon/pot guns and 25-35psi (170-250 kpa) for gravity/top container guns. As a general rule of thumb, we recommend a 1.4-1.5 nozzle.

How long does diamond clear last?

3 years in original, unopened package. Sealing 450 to 550 400 to 450 Older Concrete (11.0 to 13.5) (9.8 to 11.0) Coverage will vary depending on surface porosity and texture.

How do you seal metal so it doesn’t rust?

Galvanize: Galvanizing coats iron or steel in zinc to protect from rust. Zinc corrodes at a much slower rate than iron or steel, so it’s highly effective for slowing rust. Blueing: This process creates a layer of magnetite over the metal to prevent rust.

How long does it take for KBS rust seal to dry?

2-4 hours
Average cure times are 2-4 hours, depending on humidity levels. NOTE: Do not apply RustSeal in wet or humid conditions to avoid rapid curing. Also do not apply RustSeal too thick or too quick between coats.

What is the toughest clear coat?

All Cerakote Ceramic Clears have industry leading durability, hardness, scratch resistance flexibility and chemical resistance and have been designed specifically to be the thinnest, yet strongest, clear coating on the market and can be applied to nearly any substrate, from Hydrographics and Composites, to Metals.

What is the toughest automotive paint?

Urethane paint is the most durable auto paint and is also chip-resistant—when properly maintained, a coat of urethane paint will outlast most acrylic paints.

Can you airbrush KBS diamond clear?

Clear remains permanently flexible and is able to perform in the world’s toughest environments without yellowing or cracking. DiamondFinish Clear can be applied by brush, roller, and conventional spray gun with excellent flow out.