Should I put sand under my above ground pool?
Should I put sand under my above ground pool?
Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.
What kind of sand do you put under a above ground pool?
Mason sand
Mason sand, sometimes called mortar sand, can normally be found at any sand/gravel yard or masonry supply yard. It is usually measured in yards. It is very fine and should not contain any rocks or pebbles. This will create a very smooth bottom and is the most popular method to use when installing an above ground pool.
How thick should sand base be for above ground pool?
Using fine sand (free of rocks and debris), lay a 3″ thick bed of sand across the entire inside of the pool (wall-to-wall) this will form your base.
How do you prepare sand for an above ground pool?
How to Prep Ground for an Above-Ground Pool
- Choose the best area of your yard to set up your pool.
- Mark the perimeter of the pool area.
- Remove all sod and other vegetation from the area.
- Determine the lowest point of the pool area.
- Create a wood level.
How many inches of sand do you need for a pool?
two to three-inch
How Much Sand Do I Need for My Pool? The general rule is that there should be a two to three-inch base of sand under an above ground pool. If you know the dimensions of your pool area, then you can easily figure out how much sand you’ll need for the base using a sand calculator.
How many bags of sand do I need for an above ground pool?
How Much Sand Will I Need For Pool Installation?
| Amount for Sand Base with SAND COVE | ||
|---|---|---|
| Pool Size | Yards of Sand | Tons of Sand |
| 12′ Round | 1.00 | 1.40 |
| 15′ Round | 1.50 | 2.00 |
| 18′ Round | 2.00 | 3.00 |
How many bags of sand do I need for a 24 foot pool?
How Much Sand Will I Need For Pool Installation?
| Amount for Sand Base with SAND COVE | ||
|---|---|---|
| 18′ Round | 2.00 | 3.00 |
| 21′ Round | 2.50 | 3.50 |
| 24′ Round | 3.50 | 5.00 |
| 27′ Round | 4.00 | 5.50 |
How much area does a 50lb bag of sand cover?
Regarding this, “50 lb bag of sand cover how much area?”, generally a typical 50 lb bag of sand yields 0.5 cubic feet that will cover 3 square feet area for standard 2 inch depth for excavation and backfills, for 1 inch depth, it will cover 6 square feet, for 3 inch depth, it will cover 2 square feet and for 4 inch …
How many bags of sand do I need for a 18 ft pool?
How many bags of sand do I need for a 18ft pool?
Volume = (width x length x depth) x 0.037 For a rectangular pool that’s 18 feet long by 9 feet wide, you’d need at least 1 cubic yard of sand for your base.