What is the stock length of a Springer front end?

Stock Length 22″ Black Springer Front End Harley Sportster Chopper Softail Arched. Improtant: Measure from the bottom neck bearing down to the axle.

How long is a 12 over Springer?

39″
Wide Springer Front End With Half Round Rear Legs – 12″ Over stock (total length – 39″)

How do you measure a Springer front end?

Place your front wheel so the axle would be about 3 inches in front of the broomstick, then measure from the bottom of the frame neck to the axle hole in the wheel. This number will be your guide for the springer length you need. About 22″ indicates you need a stock length springer. You can go + or – from there.

How are Springer forks measured?

Measure from the center/axle of the front wheel (with a properly inflated tire) straight up to the top of where the neck will be when the front frame rail is 6″ from the ground.

How long is a stock Harley front end?

Measurement is from “The top of the bottom tree to the center of the axle”, and their “stock” front end is 23″.

What does 4 over forks mean?

It’s the amount of inches over or under the length of the stock forks for whatever bike they are designed for. More length makes more rake and will be more stable but less responsive. Shorter length makes less rake making it more responsive but also more twitchy. 10-08-2015 #3. Saltytonk.

How do you measure a Paughco Springer?

Most springer lengths are measured from the top of the lower tree (where the lower neck stem bearing sits), to the center of the axle, but not Paughco. On page 36 of their catalog, Paughco shows their method of measurement: from the top of the rear leg to the centre of the rocker pivot on the rear leg…

How do you measure a motorcycle front end?

Raise the bike to an upright position, using a tape measure, hold the tape straight down from the front axle to the floor. Put a mark on the floor at that point. Then place the tape parallel to the steering neck, following the angle of the steering neck all the way up to the floor.

What is the stock length of a wide glide front end?

Chrome Billet Front End +4″ Over Stock Length for Harley Davidson Wide Glide features: 37″ overall length. 41mm forks. Single disc application.

How do I identify a Shovelhead?

The Shovelhead Engine (1966 – 1985) The heads resemble the curve of a shovel, hence the name. This type of engine is the most difficult to identify because the shape does not resemble that of a traditional shovel. Instead it looks more like a coal shovel flipped upside down.