What kind of grease do you use for trailer bearings?

LMX Red Grease A heavy-duty, premium grease rated for just about every application, including marine trailer-wheel bearings. It resists water well and sticks in place, so it’s excellent in outdoor applications, but it isn’t specially formulated for wheel bearings.

How often should I grease my trailer bearings?

Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer under conditions of extreme heat or near its maximum load capacity.

Should a trailer ball be greased?

You do not need to grease your trailer hitch ball. That is entirely up to you. However, greasing it is recommended. Greasing will help ensure that the trailer hitch ball keeps its structural integrity, and it will help prevent it from squeaking.

Should I fill my trailer hub with grease?

1 and 2), pump a ring of grease into the entire circumference of the wheel hub and coat the hub cap inner wall. The housing should only be half full of grease. Too much grease causes churning and higher temperatures. Semi-fluid grease must be used with a vented hub cap.

How do I know if my trailer bearings need grease?

If noise is heard, check for a bad bearing or if lubrication is needed. Check for Heat – Tow the trailer for a short distance, 5-10 miles at highways speeds, then park the trailer. Place your hand on each of the wheel hubs of the trailer. If it is too warm to hold your hand in place, you may have a bad bearing.

Can you over grease a bearing?

Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.

Do trailer hitch balls wear out?

Without lubrication, the hitch ball will wear out prematurely and will need replaced far more often than a well greased hitch ball. Grease on the ball also helps the trailer to “follow” the vehicle more easily because the coupler can rotate on the ball with less friction.

Can you put too much grease in a bearing buddy?

Can Bearing Buddy Bearing Protectors Be Over-Filled with Too Much Grease It is possible to over-fill a hub that has a Bearing Buddy bearing protector such as #BB1781. The convenience of easy filling through the zerk fitting can often mean we can be tempted to keep adding more grease.