Why does my Xerox printer keep jamming?

The following are the top reasons why paper jams occur: incorrect paper settings in the tray and/or the print driver. paper loaded incorrectly and/or paper edge guides not adjusted properly in the tray. humidity and/or paper condition and storage. Use a new ream of paper.

Why does the paper in my printer keep jamming?

If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.

What do I do when my printer says paper jam but there is none?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.

How do I fix my printer from smudging?

HP Inkjet Supplies – Ink Smears or Streaks

1. Step one: Check your paper. Make sure you printed on fresh, unwrinkled paper.
2. Step two: Run the clean print cartridges utility. Press the Setup button.
3. Step three: Clean the area around the cartridge nozzles. note:
4. Step four: Replace the problem cartridge.

How do you clean a Fuji Xerox drum?

Press the Machine Status button. Select the Supplies tab. Select Drum Cartridge. Select Drum Cleaning to start the drum cleaning process.

How do you fix a continuous paper jam?

Jam session

1. Make sure your device’s paper is correctly loaded into the slot or tray.
2. When you reload your input tray, pay attention to the tray’s needs.
3. If your device has a paper tray, do not overload it.
4. Use only one kind of paper at a time in your input tray.
5. Fan the stack of paper that you’re about to load.

Why does my printer paper jam?

This is one of the most common causes of paper jams. Loading paper that is stuck together, frayed, curled or bent can cause a jam. Overloading the paper tray, loading different thicknesses of paper in the tray or using paper that isn’t appropriate for your particular printer can all result in a jammed printer.